Lots

The odour and stain removal products as lotted and including urine-off, wine-off and coffee-off.

Total Cost Value - £2,255.05 (per stock list). A full unaudited stock list for guidance purposes only is available below - viewing is strongly recommended.

Important Note: This lot is also included within Lot 3 (Lots 1 and 2 combined). The lots will be sold either as individual lots or as a whole, whichever achieves the highest realisation at the end of the auction. If the reserve is met, we are therefore NOT obliged to complete the sale on this as an individual lot.

The pet grooming brushes, pet food bowls, and sundries as lotted and including Foolee grooming brushes, Omega hungry pet bowls (for dogs and cats) and sundries (including a quantity of packaging materials that does not appear in the stock list below).

Total Cost Value - £5,181.35 (per stock list). A full unaudited stock list for guidance purposes only is available below - viewing is strongly recommended.

Important Note: This lot is also included within Lot 3 (Lots 1 and 2 combined). The lots will be sold either as individual lots or as a whole, whichever achieves the highest realisation at the end of the auction. If the reserve is met, we are therefore NOT obliged to complete the sale on this as an individual lot.


 
 

Lots 1 and 2 combined - Pet Grooming Brushes, Pet Food Bowls and Odour and Stain Removal Products as lotted

Total Cost Value - £7,436.40 (per stock list). A full unaudited stock list for guidance purposes only is available below - viewing is strongly recommended.

Important Note: This lot is also being offered as individual lots, see lots 1 and 2. The lots will, therefore, be sold either as individual lots or as a whole, whichever achieves the highest realisation at the end of the auction. If the reserve is met on this lot, we are therefore NOT obliged to complete the sale on this lot.

A heavy-duty MTB BAT1200 granulation line with a Wilfley wet separation shaking table (currently used for copper cable) comprising:

1 Variable speed belt feeder with hopper
1 Automatic inclined belt conveyor, circa 5m long x 0.5m width, with load sensors
1 Eriez Magnetics conveyor bridging magnet with motorised conveyor, delivery chute and guarding
1 MTB BAT1200 rotating granulator (1.2m rotor and 2-tonne per hour capacity advised) with dust extraction
1 Oasis Engineering control panel (no. PO380) for conveyor belts, screw feeders and granulator
1 Automatic inclined belt conveyor delivery from granulator, circa 3m long x 0.4m width, delivering granulated cabling to:
1 Automatic inclined mobile feed conveyor, circa 5m long x 0.5m width, with a wheeled base, feeding to:
1 Electric vibrating hopper feeder with access platform, ladder, dust extraction, control panel and outfeed to:
1 Wilfley vibrating wet separation shaking table (circa 1.5m x 4m) with Mogensen dewatering screen
1 Automatic inclined screw feeding auger conveyor (circa 6m long)
1 Steel framed collection bag holder with excess water extraction pump

Important Note: This lot is also being offered as individual lots, see lots 1A to 1G. The lots will, therefore, be sold either as individual lots or as a complete line, whichever achieves the highest realisation at the end of the auction. If the reserve is met on this lot, we are therefore NOT obliged to complete the sale on this lot.

Please note: The purchaser must provide a risk assessment and removal method statement (RAMS) detailing how they will safely remove the lot from the premises.

A variable speed belt feeder with hopper

Important Note: This lot is also included within Lot 1, the Copper Cable Granulation Line 1. The lots will be sold either as individual lots or as a complete line, whichever achieves the highest realisation at the end of the auction. If the reserve is met, we are therefore NOT obliged to complete the sale on this as an individual lot.

Please note: The purchaser must provide a risk assessment and removal method statement (RAMS) detailing how they will safely remove the lot from the premises.

An automatic inclined belt conveyor, circa 5m long x 0.5m width, with load sensors, together with an Eriez Magnetics conveyor bridging magnet with motorised conveyor, delivery chute and guarding

Important Note: This lot is also included within Lot 1, the Copper Cable Granulation Line 1. The lots will be sold either as individual lots or as a complete line, whichever achieves the highest realisation at the end of the auction. If the reserve is met, we are therefore NOT obliged to complete the sale on this as an individual lot.

Please note: The purchaser must provide a risk assessment and removal method statement (RAMS) detailing how they will safely remove the lot from the premises.

An MTB BAT1200 rotating granulator (1.2m rotor and 2-tonne per hour capacity advised) with dust extraction and an automatic inclined belt conveyor delivery from granulator, circa 3m long x 0.4m width together with an Oasis Engineering control panel (no. PO380) for conveyor belts, screw feeders and granulator

Important Note: This lot is also included within Lot 1, the Copper Cable Granulation Line 1. The lots will be sold either as individual lots or as a complete line, whichever achieves the highest realisation at the end of the auction. If the reserve is met, we are therefore NOT obliged to complete the sale on this as an individual lot.

Please note: The purchaser must provide a risk assessment and removal method statement (RAMS) detailing how they will safely remove the lot from the premises.

An automatic inclined mobile feed conveyor, circa 5m long x 0.5m width, with a wheeled base

Important Note: This lot is also included within Lot 1, the Copper Cable Granulation Line 1. The lots will be sold either as individual lots or as a complete line, whichever achieves the highest realisation at the end of the auction. If the reserve is met, we are therefore NOT obliged to complete the sale on this as an individual lot.

Please note: The purchaser must provide a risk assessment and removal method statement (RAMS) detailing how they will safely remove the lot from the premises.

An electric vibrating hopper feeder with access platform, ladder, dust extraction, control panel and outfeed

Important Note: This lot is also included within Lot 1, the Copper Cable Granulation Line 1. The lots will be sold either as individual lots or as a complete line, whichever achieves the highest realisation at the end of the auction. If the reserve is met, we are therefore NOT obliged to complete the sale on this as an individual lot.

Please note: The purchaser must provide a risk assessment and removal method statement (RAMS) detailing how they will safely remove the lot from the premises.

A Wilfley vibrating wet separation shaking table (circa 1.5m x 4m) with Mogensen dewatering screen

Important Note: This lot is also included within Lot 1, the Copper Cable Granulation Line 1. The lots will be sold either as individual lots or as a complete line, whichever achieves the highest realisation at the end of the auction. If the reserve is met, we are therefore NOT obliged to complete the sale on this as an individual lot.

Please note: The purchaser must provide a risk assessment and removal method statement (RAMS) detailing how they will safely remove the lot from the premises.

An automatic inclined screw feeding auger conveyor (circa 6m long), together with a steel framed collection bag holder with excess water extraction pump

Important Note: This lot is also included within Lot 1, the Copper Cable Granulation Line 1. The lots will be sold either as individual lots or as a complete line, whichever achieves the highest realisation at the end of the auction. If the reserve is met, we are therefore NOT obliged to complete the sale on this as an individual lot.

Please note: The purchaser must provide a risk assessment and removal method statement (RAMS) detailing how they will safely remove the lot from the premises.

A heavy-duty MTB BAT1200 granulation line (currently used for copper cable) comprising:

1 Variable speed belt feeder with hopper
1 Automatic inclined belt conveyor, circa 5m long x 0.5m width, with load sensors and a Master Magnets conveyor bridging magnet
1 MTB BAT1200 rotating granulator (1.2m rotor and 2-tonne per hour capacity advised) with dust extraction
1 Electric control panel
2 Automatic inclined screw feeding auger conveyors (one circa 6m long and one circa 7.5m long)

Important Note: This lot is also being offered as individual lots, see lots 2A to 2D. The lots will, therefore, be sold either as individual lots or as a complete line, whichever achieves the highest realisation at the end of the auction. If the reserve is met on this lot, we are therefore NOT obliged to complete the sale on this lot.

Please note: The purchaser must provide a risk assessment and removal method statement (RAMS) detailing how they will safely remove the lot from the premises.

A variable speed belt feeder with hopper

Important Note: This lot is also included within Lot 2, the Copper Cable Granulation Line 2. The lots will be sold either as individual lots or as a complete line, whichever achieves the highest realisation at the end of the auction. If the reserve is met, we are therefore NOT obliged to complete the sale on this as an individual lot.

Please note: The purchaser must provide a risk assessment and removal method statement (RAMS) detailing how they will safely remove the lot from the premises.

An automatic inclined belt conveyor, circa 5m long x 0.5m width, with load sensors and a Master Magnets conveyor bridging magnet

Important Note: This lot is also included within Lot 2, the Copper Cable Granulation Line 2. The lots will be sold either as individual lots or as a complete line, whichever achieves the highest realisation at the end of the auction. If the reserve is met, we are therefore NOT obliged to complete the sale on this as an individual lot.

Please note: The purchaser must provide a risk assessment and removal method statement (RAMS) detailing how they will safely remove the lot from the premises.

A heavy-duty MTB BAT1200 rotating granulator (1.2m rotor and 2-tonne per hour capacity advised) with dust extraction, together with an electric control panel

Important Note: This lot is also included within Lot 2, the Copper Cable Granulation Line 2. The lots will be sold either as individual lots or as a complete line, whichever achieves the highest realisation at the end of the auction. If the reserve is met, we are therefore NOT obliged to complete the sale on this as an individual lot.

Please note: The purchaser must provide a risk assessment and removal method statement (RAMS) detailing how they will safely remove the lot from the premises.

Two automatic inclined screw feeding auger conveyors (one circa 6m long and one circa 7.5m long)

Important Note: This lot is also included within Lot 2, the Copper Cable Granulation Line 2. The lots will be sold either as individual lots or as a complete line, whichever achieves the highest realisation at the end of the auction. If the reserve is met, we are therefore NOT obliged to complete the sale on this as an individual lot.

Please note: The purchaser must provide a risk assessment and removal method statement (RAMS) detailing how they will safely remove the lot from the premises.

A Locker Industries rotating LPG fired drum dryer serial no. F31323 (2001) with three-phase electric vibration control, ceramic lining, pulse modulating hopper feeder, Devil 4000 portable propane space heater and automatic inclined belt conveyor delivery (circa 3m long x 0.4m width) with magnetic head drum, together with Steel 11-tread mobile safety steps 

Please note: The purchaser must provide a risk assessment and removal method statement (RAMS) detailing how they will safely remove the lot from the premises.

A Falcon 462 Series semi-mobile heavy-duty twin shaft shredder (currently used for copper cable) with CAT3406 500hp diesel engine, Parker Dennison P30 hydraulic pump, Hagglunds CA motor, gearbox, hopper feed, Falcon twin shaft shredder, 1.1m width inclined automatic belt conveyor delivery and 6,385 recorded hours

Please note: The purchaser must provide a risk assessment and removal method statement (RAMS) detailing how they will safely remove the lot from the premises.

A Falcon/Wilfley wet separation system comprising:

1 Rotex SFH46 Super Feeder three-phase electric hopper feeder serial no. F31377 (2003)
1 Automatic inclined screw feeding auger conveyor (circa 10m long) with hopper and delivery chute to:
1 Wilfley wet separation shaking table (circa 1.5m x 4m) serial no. W07/037 with an Invicta Vibrators dewatering screen
1 Steel cubic water storage tank on stand with gravity feed to system
1 Automatic inclined screw feeding auger conveyor (circa 5m long) with a steel fabricated bag collection stand

Important Note: This lot is also being offered as individual lots, see lots 5A to 5D. The lots will, therefore, be sold either as individual lots or as a complete line, whichever achieves the highest realisation at the end of the auction. If the reserve is met on this lot, we are therefore NOT obliged to complete the sale on this lot.

Please note: The purchaser must provide a risk assessment and removal method statement (RAMS) detailing how they will safely remove the lot from the premises.

A 2003 Rotex SFH46 Super Feeder three-phase electric hopper feeder no. F31377 

Important Note: This lot is also included within Lot 5, a Falcon wet copper separation system. The lots will be sold either as individual lots or as a complete line, whichever achieves the highest realisation at the end of the auction. If the reserve is met, we are therefore NOT obliged to complete the sale on this as an individual lot.

Please note: The purchaser must provide a risk assessment and removal method statement (RAMS) detailing how they will safely remove the lot from the premises.

An automatic inclined screw feeding auger conveyor (circa 10m long) with hopper and delivery chute

Important Note: This lot is also included within Lot 5, a Falcon wet copper separation system. The lots will be sold either as individual lots or as a complete line, whichever achieves the highest realisation at the end of the auction. If the reserve is met, we are therefore NOT obliged to complete the sale on this as an individual lot.

Please note: The purchaser must provide a risk assessment and removal method statement (RAMS) detailing how they will safely remove the lot from the premises.

A Wilfley wet separation shaking table (circa 1.5m x 4m) serial no. W07/037 with an Invicta Vibrators dewatering screen

Important Note: This lot is also included within Lot 5, a Falcon wet copper separation system. The lots will be sold either as individual lots or as a complete line, whichever achieves the highest realisation at the end of the auction. If the reserve is met, we are therefore NOT obliged to complete the sale on this as an individual lot.

Please note: The purchaser must provide a risk assessment and removal method statement (RAMS) detailing how they will safely remove the lot from the premises.

An automatic inclined screw feeding auger conveyor (circa 5m long) with a steel fabricated bag collection stand

Important Note: This lot is also included within Lot 5, a Falcon wet copper separation system. The lots will be sold either as individual lots or as a complete line, whichever achieves the highest realisation at the end of the auction. If the reserve is met, we are therefore NOT obliged to complete the sale on this as an individual lot.

Please note: The purchaser must provide a risk assessment and removal method statement (RAMS) detailing how they will safely remove the lot from the premises.

A Falcon 400 Series heavy-duty shredder (currently used for copper cables) advised with 4-tonne per hour capacity, hopper feed, single rotor shredder, automatic horizontal belt conveyor collection, automatic inclined wide belt delivery conveyor, access ladder and galvanised platform, 2 x 200kw three-phase electric motors (4-pole/TEFC/Ralspeed soft-start) with shelter and fans, driving an open-loop hydraulic system comprising of Kawasaki/Staffa 280 DT pumps and B400 Staffa piston motors and remote three-phase fully automatic control panel with PLC controller

Please note: The purchaser must provide a risk assessment and removal method statement (RAMS) detailing how they will safely remove the lot from the premises.

A Donaldson Torit TD6120 three-phase electric pneumatic cartridge filter dust extraction system no. CMP8620 with trough hopper outlet, ducting from enclosed extraction fan, access platform and ladder, and ducting

Please note: The purchaser must provide a risk assessment and removal method statement (RAMS) detailing how they will safely remove the lot from the premises.

A 2005 Orwak 8020 twin-chambered baler no. 5461683 with 2.2kw three-phase electric motor

Please note: The purchaser must provide a risk assessment and removal method statement (RAMS) detailing how they will safely remove the lot from the premises.

A Bespoke ASR pre-treatment wash system with various parts including a Wrights Machinery Super Feeder feeding system, a Wrights 125cm diameter x 450cm long wet trommel in steel frame, an All Pumps pump and recirculation water tank, a Mastermag Master Magnets Limited magnet with 80cm x 270cm conveyor belt in steel frame, and a belt conveyor (not in use)

Please note: The purchaser must provide a risk assessment and removal method statement (RAMS) detailing how they will safely remove the lot from the premises.

A 2000 Payne 6’1” STD INVERTER pallet inverter no. 1578 (max load 2,000kg) with a Reer Argolux AS ASR618 light curtain no. 00210616 (not in use)

Please note: The purchaser must provide a risk assessment and removal method statement (RAMS) detailing how they will safely remove the lot from the premises.

A 2003 Payne 6’1” STD pallet inverter no. 1669, (max load 2000kg) (not in use)

Please note: The purchaser must provide a risk assessment and removal method statement (RAMS) detailing how they will safely remove the lot from the premises.

A Jungheinrich steel hydraulic loading ramp (circa 1120cm x 221cm) (not in use)

Please note: The purchaser must provide a risk assessment and removal method statement (RAMS) detailing how they will safely remove the lot from the premises.

An unbranded inclined belt conveyor (circa 400cm x 44cm) (not in use)

Please note: The purchaser must provide a risk assessment and removal method statement (RAMS) detailing how they will safely remove the lot from the premises.

A Mardon three bag dust extractor together with an unbranded single bag dust extractor (not in use)

Please note: The purchaser must provide a risk assessment and removal method statement (RAMS) detailing how they will safely remove the lot from the premises.

An Empteezy steel chemicals cabinet, with a quantity of hydraulic oil and sundry paints and chemicals (circa 150cm x 140cm x 205cm)

Please note: The purchaser must provide a risk assessment and removal method statement (RAMS) detailing how they will safely remove the lot from the premises.

A Triple / S Dynamics BX-260 gravity separator no. GR-9312 (not in use)

Please note: The purchaser must provide a risk assessment and removal method statement (RAMS) detailing how they will safely remove the lot from the premises.

A steel gas bottle cage with forklift pockets (circa 144cm x 105cm x 220cm) (gas bottles excluded)

Please note: The purchaser must provide a risk assessment and removal method statement (RAMS) detailing how they will safely remove the lot from the premises.

A steel gas bottle cage with forklift pockets (circa 144cm x 110cm x 220cm) (gas bottles excluded)

Please note: The purchaser must provide a risk assessment and removal method statement (RAMS) detailing how they will safely remove the lot from the premises.

A steel fabricated loading hopper (circa 170cm x 170cm x 250cm/316cm) together with a mobile steel fabricated bag collection stand (circa 140cm x 140cm x 215cm)

Please note: The purchaser must provide a risk assessment and removal method statement (RAMS) detailing how they will safely remove the lot from the premises.

A 2012 Robopac Ecoplat Base single-phase electric turntable pallet wrapping machine no. KN/110709 (375kg weight, with 1.7m diameter turntable)

Please note: The purchaser must provide a risk assessment and removal method statement (RAMS) detailing how they will safely remove the lot from the premises.

A 2006 Abac Genesis 1108 11kw air compressor serial no. 2843090007 on horizontal air receiver tank

Please note: The purchaser must provide a risk assessment and removal method statement (RAMS) detailing how they will safely remove the lot from the premises.

A 1996 Kaeser Plusair SK26 15kw/7.5 bar air compressor no. 02610294 (4,693 recorded hours) with a 2002 Rednal Pneumatics 340ltr welded pressure vessel no. 18863/003

Please note: The purchaser must provide a risk assessment and removal method statement (RAMS) detailing how they will safely remove the lot from the premises.

A SIP 01453 1HP single bag mobile dust extractor no. 627.10.05

A Numatic NTT 2003-2 triple motor industrial cyclonic dry vacuum cleaner on trolley no. 113517447 (230v)

A fabricated steel three-tier cantilever racking unit (circa 450cm x 60cm x175cm) with a quantity of angle iron and metal stock as lotted

Please note: The purchaser must provide a risk assessment and removal method statement (RAMS) detailing how they will safely remove the lot from the premises.

A quantity of sundry cutting blocks and spares as lotted for both MTB BAT and Falcon granulators/shredders

A quantity of shredder/granulator grading screens on two pallets as lotted

An unbranded drum pump and drum

A Slingsby 2,000kg hand hydraulic pallet truck and a Logitrans 2,500kg hand hydraulic pallet truck

A Jungheinrich 2,200kg hand hydraulic pallet truck and an unbranded 2,500kg hand hydraulic pallet truck

An Eoslift SPA-M25 2,500kg hand hydraulic pallet truck and a Crown 2,000kg hand hydraulic pallet truck

A unbranded hand hydraulic pallet truck (all faults) together with two sack trucks (all faults)

Two sledgehammers, together with a sledgehammer head and a 150cm chisel and point straight crowbar

A quantity of spades shovels and a broom as lotted

A Tengtools Teng Mega Master three-part steel workshop tool cabinet with a quantity of tools as lotted

Two steel four-drawer vertical filing cabinets with contents, together with a 153cm x 75cm steel framed wooden topped workbench with drawer under including a quantity of sundry tools (in drawer) as lotted

A fabricated steel workbench (160cm x 151cm)

Please note: The purchaser must provide a risk assessment and removal method statement (RAMS) detailing how they will safely remove the lot from the premises.

A fabricated steel workbench (126cm x 91cm) with a bench fitted Eclipse EMV-6 6 inch mechanics vice

Please note: The purchaser must provide a risk assessment and removal method statement (RAMS) detailing how they will safely remove the lot from the premises.

A quantity of redundant pumps and motors as lotted

A Performance Power NLH350DP 350W/13mm bench drill no. 31079201

Draper Expert ¼ inch socket set (incomplete) in a rigid plastic case

Tengtools ¾ inch socket set (incomplete) in rigid plastic case, together with a Neilson ½ inch deep impact socket set (incomplete) in a rigid plastic case

A Draper Expert EPTW30-100 ½ inch torque wrench in a rigid plastic case

A CK 4463 ½ inch torque wrench in a rigid plastic case

A Britool EVT3000A ½ inch torque wrench no. M100857, in a rigid plastic case

A Draper GHD200 200mm heavy duty bench grinder

A 2014 Bosch GWS660 115mm angle grinder no. 404003462, together with a 2017 Makita GA4530R 115mm/110V angle grinder (grinding discs not included)

A Leister GH1BV hot air welding tool

A Draper HPK 10 tonne hydraulic puller kit in a rigid plastic case

An Hitachi CR12V 115mm saber saw no. 590162 in rigid plastic case

A Draper Expert CGG18 18V cordless grease gun no. 150300473 in a rigid plastic case, together with an unbranded hand operated grease gun

A Stanley plastic toolbox with a quantity of hand tools and a Tactix plastic toolbox with a quantity of hand tools as lotted

Two plastic crates containing hand tools as lotted

A quantity of electrical connectors, a quantity of power tool batteries (untested) and a quantity of extension cables and sundries in two plastic crates as lotted

A Workzone foldable worktable

Three stepladders as lotted

A 48cm steel roller stand

A 2005 MAN/ERF 32.353 FFDRC/M 3.205 10518 cc diesel skip loader lorry registration number R333 RRR recorded kilometers 314,749 (not warranted) (SORN/MOT expired 31 July 2016/Date of First Registration 22 November 2005) with a HYVA/Technamics B.V. hook loader and Autosheet no. 23144234.

Please note: That the roll-on-roll-off hook bin is not included in this lot.

Please note: This vehicle is at a separate location in Willenhall, please notify the auctioneer should you wish to view this lot.

Winter Sunset by Alison Lapper MBE

Artist: Alison Lapper MBE
Title: Winter Sunset
Medium: Water Colour
Size: 30cm x 40cm

About the Artist

Born: 1965
Lives in: Sussex
Subjects: Figurative, Landscape
Style: Mouth Artist
Nationality: British 

Alison Lapper was born without arms. Born on 7th April 1965 in Burton on Trent, she spent the first 17 years of her life in a hospital in Switzerland. She took up foot painting at an early age. She had to give up foot painting and switch over to mouth painting after an operation. From this time on, she concentrated very hard on her artistic education. In 1994, her name was entered in the honorary list of best students of fine arts at the University of Brighton. Since 1982 the VDMFK has supported Alison Lapper by granting her a scholarship.

She became an Associate Member of the Association in 1993 and a Full Member in 1995. The artist’s favourite motifs are nudes, collages and compositions, which she mostly paints in watercolour. Her artistic sureness when drawing is astounding. Today, Alison Lapper teaches mouth painting at one-day seminars. Her works have repeatedly been shown at exhibitions and have owned her various prizes. Alison Lapper has been a guest on several television and radio programmes.

Padstow Harbour by Keith Jansz

Artist: Keith Jansz
Title: Motor Yacht in Padstow Harbour
Medium: Giclee Print
Size: 70cm x 60cm

About the Artist

Lives in: Oxfordshire
Subjects: Figures, cityscapes and water
Style: Mouth Artist
Nationality: British

Keith Jansz started painting for the first time since junior school after having run the London Marathon for Barnardo’s in 1995. Just two months later he suffered a broken neck in a tragic car accident, resulting in complete paralysis from the shoulders down. After six months in the National Spinal Injuries Centre at Stoke Mandeville Hospital, Keith returned home to begin the painful process of adjusting to his new situation. Unable to do anything for himself Keith naturally experienced the depths of despair.

In December 1996 Keith’s mother-in-law gave him a book entitled ‘ Painters First’, a collection of biographies of the Mouth & Foot Painting Artists. Keith was able to empathise with the artists' tragic stories and was inspired by reading of their triumphs and successes. Eager to encourage this spark of interest Keith’s wife, Cindy, arranged a meeting with the mouth artist Trevor Wells who persuaded Keith to try painting by holding a brush in his mouth. Despite disastrous early efforts, Keith persevered and in 1998 he was accepted as a Student Artist by the international self-help organisation, the Mouth & Foot Painting Artists. This achievement spurred Keith on to work with such determination that in 2000 he was promoted to a full Member Artist within the Association. Since then Keith’s paintings have been sold as reproductions worldwide. He has held numerous solo exhibitions in the U.K., U.S. and Italy and his paintings have been exhibited in museums around the world including Lisbon, Madrid, Copenhagen, Shanghai and Atlanta.

Keith enjoys exploring the sensations of light in his paintings, from the sparkling reflective sunlight at the beach to the unique atmospheric light in Venice and the long shadows of winter light on snow. He also enjoys the demanding discipline of painting the human figure, in pastel or oil. Like his heroes the Impressionists, Keith revels in the challenge of painting ‘en plein air‘ to capture the most authentic effect, completing his paintings in the studio.

Keith's artwork can be seen on his website  https://keithjansz.com/ 

Spiritual Landscape by Lissu Lundstom

Artist: Lissu Lundstom
Title: Spiritual Landscape
Medium: Oil on Canvass
Size: 60cm x 50cm

About the Artist

Born: 1952
Lives in: Helsinki
Style: Mouth Artist
Nationality: Finnish

Lissu Lundström was born on 19 April 1952 in Helsinki, with a severe disability. She attended a special school where she found that she was able to write holding a pen between her teeth. It was also noticed that she was very interested in painting. At the age of eleven, she made her first attempts to paint, which were promising. Numerous surgical interventions contributed to making her uncontrolled movements less marked and also made painting easier for her. From 1973 onwards Lissu Lundström focussed on her education. The most important part of her education was an art course at the cultural centre for adult education in Helsinki. She experimented with different techniques. She discovered that she preferred painting with oil.

With oil I can express what I have to say, says the artist. Light, colours and the sea provide Lissu Lundström with incredible inspiration. Which is why it is not surprising to see the connection of water, colour and light reappearing frequently in her works. The Association granted the artist a scholarship. Only three years later she became an Associate Member of the AMFPA. She became a Full Member in 1996. She is also a member of the “Finnish Artists Association”. To date, Lissu Lundström can look back on numerous contributions to exhibitions around the world. She has also organised various personal exhibitions in her hometown Helsinki.

Coastal Landscape by Manuel Parreño Rivera

Artist: Manuel Parreño Rivera
Title: Coastal Landscape
Medium: Oil on Canvass
Size: 60cm x 38cm

About the Artist

Born: 1938
Lives in: Valverde del Camino, Huelva, Spain
Style: Foot Artist
Nationality: Spanish

Born on 22 November 1938 in Valverde del Camino, Manuel Parreño Rivera suffered from polio at the age of seven months resulting in the paralysis of his arms and hands. For this reason, even as a small boy, he was compelled to use his feet for doing various activities. He felt a painter’s calling from a very early age when he completed his first drawing at the age of four and won first prize in a school competition at the age of eight. He further developed his artistic techniques in painting and drawing both on his own initiative and later at the school of Art in Seville. The foot painter became a member of the Association as early as 1957 and has been a member of the MFPA board since 1995.

Drawing and painting have remained his favourite activities. His works have brought him numerous awards and honours over the years. Manuel was among other honours appointed professor of the “Taller Municipal de Artes Plasticas” in his homeland in 1980. In 2000 he was appointed an honorary member of the “Pontificia y Real Archicofradia de Nuestra Senora de la Soledad de la Porteria”, In Las Palmas de Gran Canaria, the patron of which is her Majesty Queen Sofia of Spain. The reason for this appointment was the presentation and the consecration of one of his works for a local church. Public attention has been drawn to his works worldwide in one man and joint exhibitions. In addition to this, he also lectures widely on the works and the objectives of the Association as well as on art in general.

More of Manuel's work can be seen at www.facebook.com/manuel.parrenorivera

Farmers Favourite by Eva Nilsson

Artist: Eva Nilsson
Title: Farmers Favourite
Medium: Oil on Canvass
Size: 21.5cm x 26cm

About the Artist

Born: 1973
Subjects: themes from her native country, still lifes and portraits
Style: Mouth Artist
Nationality: Swedish

Eva Nilsson was born on 16 June 1973 in Sundsvall. In 1998, she was involved in a diving accident which left her with spinal trauma and a fracture of the C4-C5 vertebrae causing her upper and lower limbs to remain paralysed. In 1999, she began using her mouth to express herself as an artist.

From 2005, she has been supported by AMFPA as a Scholarship Holder and became an Associate Member in 2011. The artist predominantly paints themes from her native country, still lifes and portraits. In doing so, she uses oil and acrylic techniques.

Autumn Landscape by Brom Wikstrom

Artist: Brom Wikstrom
Title: Autumn Landscape
Medium: Watercolour on Board
Size: 30cm x 40cm

About the Artist

Born: 1953
Subjects: watercolour, mural paintings
Style: Mouth Artist
Nationality: American

Born on 13 October 1953 in Seattle, Brom Wikstrom began his career as an apprentice in his father’s commercial art business. A swimming accident in 1975 left him paralyzed and he began painting with his mouth. For several years he took painting lessons with his father and in 1985 he received a scholarship from the AMFPA. Since 1992 he has been a Full Member of the Association. In the course of the years, he took college classes in art therapy and he established an arts program at the Children’s Hospital in Seattle. He furthermore demonstrates his painting style in regional schools and at local arts festivals.

Most of his works are in watercolour, characterized by a beautiful clarity combined with firm graphic construction and transparent colours. He also does mural paintings. Brom says of his work: “My paintings are the landmarks of my development as an artist and a person. They serve as a witness to my deep belief that creative expression finds a way to come forth no matter what problems arise.” Brom Wikstrom has received several prizes and distinctions for his works. He presented his paintings to the Empress and the Emperor of Japan and received the famous “ Torchlight Award” at a ceremony in Taipei/Taiwan. The Mouth-painter can furthermore look back on numerous reports in the media.

Brom's artwork can be viewed on his website:  http://www.bromwikstrom.com/ 

Wildflowers by Josef Habeler

Artist: Josef Habeler
Title: Wildflowers
Medium: Watercolour on Board
Size: 19cm x 25.5cm

About the Artist

Born: 1944
Subjects: Landscapes
Style: Mouth Artist
Nationality: Austrian

Josef Habeler was born on 25 December 1944 in Wiener Neustadt. In December 2000 he fell off a tree and suffered a dislocation fracture of the cervical spine. He can no longer use his arms or legs. A several-week-long stay at the hospital was followed by nine months of rehabilitation. In July 2001, during the rehabilitation period, he realised that life could be worth living again. He discovered a different side of his life to which he did not have access previously – painting with the mouth. It fascinated him to such a degree that he became caught up in it. Mouth painting helped him to bear his fate and even made him forget it for hours.

Josef soon made great progress. By coincidence, he heard about the Association of Mouth and Foot Painting Artists and was made a Student Member in 2004. In 2010 he became an Associate Member of the Association. Initially, Josef Habeler did the paintings on silk cloth and silk scarves. Soon he became interested in watercolour. Recently he had a go at acrylics and oils. Josef’s favourite theme is landscapes. On the occasions of nationwide exhibitions, Josef Habeler has had the opportunity to present his artworks to a broader public.

Angel by Ann Lund Whalberg

Artist: Ann Lund Whalberg
Title: Angel
Medium: Acrylic on Paper
Size: 21cm x 30cm

About the Artist

Born: 1971
Subjects: people, landscapes and flowers, abstract paintings full of symbolism
Style: Mouth Artist
Nationality: Danish

Ann Lund Wahlberg was born on 11 June 1971 in Aalborg. She suffers from spastic paralysis since birth. From early childhood, Ann has carried out the activities of daily living with her mouth. That was also the reason why Ann Lund Wahlberg began to paint and draw with her mouth when she was only a youngster. In 1996 she had the first opportunity to show her works to the public at an exhibition. She became a VDMFK Scholarship Holder in the year 1998. This enabled her to spend more time painting as she also had a job as a social worker.

It also provided her with the opportunity to attend courses at different art schools. In 2002 she decided to quit her job as a social worker and to dedicate herself to painting. She became an Associate Member of the Association VDMFK in 2005 and she became a Full Member in 2007. Ann Lund Wahlberg likes to paint people, landscapes and flowers. She also creates abstract paintings full of symbolism. She prefers watercolour and acrylic as well as charcoal and crayons.

Ann's artwork can be viewed:  https://www.annlund.dk/galleri/ 

Couple on Bench by Netta Ganor

Artist: Netta Ganor
Title: Couple on Bench
Medium: Acrylic on Canvas
Size: 19.5cm x 15cm

About the Artist

Born: 1979
Subjects: landscapes, animals, flowers and people
Style: Mouth Artist
Nationality: Israeli 

Netta Ganor was born in Jerusalem on 28 October 1979. After attending elementary school, high school and College of Management she gained a Bachelor’s degree in computer science in 2001 before going on to complete a Master’s Degree and a doctoral thesis in Business Administration & Information Systems. She works at a hi-tech company, has been married since 2009 and is a mother. On 25 November 1994, her life was turned completely upside down. She was a “geek” high school student who practised athletics and enjoyed making art craft, when she contracted “Transverse Myelitis” – a rare syndrome which inflated her spinal cord and left her paralysed from the shoulders down, dependent on a ventilator.

After she had recovered sufficiently to come off the ventilator, during rehabilitation, Netta met a mouth and foot painter and decided to give the painting a try. She started out with watercolour and later switching to the acrylic technique which remains her preferred painting method right up to today. Above all, she enjoys painting landscapes, animals, flowers and people. The VDMFK supported her as a student from 2003 to 2015 and she became an Associate Member of the VDMFK in 2015. In 2012 she wrote and illustrated a children’s book which achieved high sale figures in Israel. She is self-taught and uses the internet as her primary source of learning.

Netta's artwork can be viewed on her website:  https://www.nettaganor.com/home 

Winter Evening by Zeljko Vertelj

Artist: Zeljko Vertelj
Title: Winter Evening
Medium: Oil on canvas
Size: 39cm x 30cm

About the Artist

Born: 1959
Subjects: Landscape
Style: Mouth Artist
Nationality: Slovenian 

Zeljko Vertelj was born on 26 July 1959 and is a member of the Society of Paraplegics of the Province of Ljubljana. He spent his young years in the village of Črni potok near Kočevju. He remembers that as a child and a primary school kid, he liked to draw, but after finishing primary school, there was no time for this hobby. Well, there was plenty of time when he became a tetraplegic after a car accident in 1993. After completing his rehabilitation, he went to the Old People's Home in Kočevju and for a while did not know what he was supposed to do with himself.

He tried the painting. First with the drawing, but he didn't do well, because there was no grip or real feeling in his fingers. He heard that some tetraplegics draw with their mouths, so he joined the painters of the Art Section of the Association of Paraplegics of Slovenia. After his first attempts, he realized it wasn't what you were holding the brush with, it was what you could do.
Željko Vertelj has already held a series of solo and group exhibitions. He was educated under the mentorship of Benjamin Krežet andMladeno Stropnik, and now attends art workshops and colonies led by Rasso Causevig and Jože Potokar - Cvrčo. He lives and works in Kočevju.

Gathering for Lunch by David Cawthorne

Artist: David Cawthorne
Title: Gathering for Lunch
Medium: Acrylic on Canvas
Size: 58cm x 36cm

About the Artist

Born: 1962
Lives in: West Yorkshire
Subjects: Landscape, Scenery, Water
Style: Mouth Artist
Nationality: British

David Cawthorne was born in the mining community of Castleford, West Yorkshire. When he left school the obvious career for a young man from Castleford was to go ‘down the pits’ and David entered Fryston Colliery at 16. Friends at work persuaded David to join them in playing Rugby, a sport he excelled at and enjoyed every weekend until at just 18 he was involved in an accident during a game in which he broke his neck. During his time in hospital David was introduced to painting as an Occupational Therapy, a hobby which fortunately developed into a career.

David married Gillian in 1983, and with Gill and her family’s support his painting skills have flourished. David was made an Associate Member of the MFPA in 1998, and has attended numerous international conferences, representing his fellow artists. He enjoys painting landscapes, especially those including water, preferring to capture the serenity of calm seas and peaceful lakes. David rents a studio with a group of other professional artists in Wakefield, something that he finds gives him discipline in his painting.

A View Across The Trentham by Ian Parker

Artist: Ian Parker
Title: A View Across The Trentham
Medium: Acrylic on Canvas
Size: 50.5cm x 50.5cm

About the Artist

Born: 1970
Lives in: Stoke-on-Trent
Subjects: Landscapes, wildlife, steam trains
Style: Mouth Artist
Nationality: British

Ian was born with a rare condition where his joints are fixed or partially fixed. Like fellow MFPA Artists, Rob Trent and Alison Lapper, Ian attended Chailey Heritage School where he developed a talent for painting. After studying for ‘A’ levels, Ian took a Foundation Course in Art to further his skills before being accepted onto a Degree Course in Fine Art in Stoke-on-Trent, where he lives today.

Whilst studying for his degree Ian met his wife Mary, and they now have two daughters who sometimes feature in his paintings. Ian is a committed Christian whose faith plays an important part in all aspects of his life.

Sometimes Ian is invited to do talks and demonstrations at primary schools and various adult groups, as well as occasionally doing exhibitions. In 2019, after two year’s work, Ian finished illustrating the MFPA children’s book, Danny’s Dream.

Ian's artwork can be viewed on his website: https://www.ianparkerart.com/ 

Silk Flowers by Tom Yendell

Artist: Tom Yendell
Title: Silk Flowers
Medium: Silk Painting
Size: 60cm x 60cm

About the Artist

Born: 1962
Lives in: Hampshire
Subjects: Everything and anything in a graphic way!
Style: Mouth and Foot Painting Artist
Nationality: British

Tom Yendell was born in Winchester in 1962 without arms or hands due to the doctors prescribing the drug Thalidomide to his Mother during her pregnancy. Tom grew up using his mouth, feet, and chin to do everyday tasks. Tom's passion for art began very early in his life. He taught himself to draw and paint with his feet and by primary school wrote in the same way. He was fortunate to be offered a place for his schooling at Treloar's School and College in Alton, Hampshire and he remained there until he left to complete an Art Foundation course at Hastings College of Art and Technology. Tom achieved a BA in Expressive Arts from Brighton University and then worked in London for two years as a photographer. Tom joined the MFPA in 1986 and for 25 years ran the MFPA Gallery in Selborne. Tom rose up through the ranks of the MFPA Association and was proud to be elected onto the International Board in 2013. He is an Honorary Fellow of both Winchester and Brighton Universities. In his spare time, Tom is a Trustee for numerous Charities. He spends time each year as a Trustee for The Education And Book Appeal: Ghana (TEABAG Charity) where he built a Vocational Skills College. Artwise Tom paints with silk paints, Watercolour, and acrylic. His work is always graphic and very colourful.

Tom's artwork can be viewed on his website:  http://www.tomyendell.co.uk/ 

Ballet Dancer by Jeong Park

Artist: Jeong Park
Title: Ballet Dancer
Medium: Giclee Print on Paper
Size: 60cm x 60cm

About the Artist

Born: 1971
Subjects: Flowers, Landscapes and potraits
Style: Mouth Artist
Nationality: South Korean

Jeong Park was born on 27 October 1971 in Dong-Hae. In 1991 he fractured his 4th and 5th dorsal vertebrae in a swimming accident. This resulted in permanent paralysis of his arms and legs and confined Jeong to the wheelchair. In 1991 he read a report about the publishing house in South Korea. After contacting the publisher and receiving the requested information he started to paint with his mouth. It was only two years later that he became a Student Member of the Association. This gave him the opportunity to receive painting lessons once a week, enabling him to continuously improve his painting skills and thereby also his work.

He became an Associate Member of VDMFK in 2007. Jeong Park predominantly paints in oils and watercolours. From time to time he uses mixed media as well as pencils and acrylics. His favourite themes are flowers in every combination, landscapes from his native country and portraits. The mouth painting artist has already shown his works at well-known galleries in his country on several occasions.

Yellow Crocus by Brenton Swarts

Artist: Brenton Swarts
Title: Yellow Crocus
Medium: Giclee Print on Paper
Size: 60cm x 60cm

About the Artist

Born: 1978
Style: Mouth Artist
Nationality: South African

Brenton Nicholas Swartz was born on 30 October 1978 in Cape Town. Since a gunshot accident, he is paralysed from the neck down. He spent eight months in hospital and was classified as a C4-C5 tetraplegic. He attended a school for the disabled. In 1998 he finished grade 12 and went to live in a home for tetraplegic people. In 1999 he enrolled at college and studied computer-aided drawing.

In December 2006 he received a state diploma as an architectural draughtsman. He was fortunate enough to be able to work at an architect’s office for 18 months and gain a lot of experience. One of his friends who painted asked him whether he wanted to try it. In 2001 he started taking art lessons. He joined VDMFK in 2009 as a Student Member. His aim in life is to lead an independent, normal and happy life.

Sunny Days by Natalina Marcantoni

Artist: Natalina Marcantoni
Title: Sunny Days
Medium: Giclee Print on Paper
Size: 60cm x 60cm

About the Artist

Born: 1961
Style: Mouth Artist
Nationality: Italian

Born on 24 December 1961 in Verona, due to a polio vaccination Natalina Marcantoni became ill at the age of eleven months. The paralysis affected both lower limbs and, therefore, confined her to a wheelchair. From that moment on until the age of 18, she spent her life in various institutions. She attended compulsory school and a 3-year course for ceramic painting. Afterwards, she began to paint ceramics, which became her passion. She displayed her works of art at various exhibitions. The association became aware of Natalina Marcantoni through a newspaper interview. She was contacted and from that moment on she began to paint pictures. In 1989 she received a stipend from the VDMFK.

After receiving the status of an Associate Member of the association in 1993, she became a member of the VDMFK just in three years. In doing so, she was given the opportunity to show her works of art to the public in numerous exhibitions. In 1996 she hosted her first one-woman exhibition in a cultural centre in Verona which was a great success. An art critic referred to her works as an encounter with painting and poetry. She knows how to tell poetic stories with colour. Her pictures convey a feeling, a passion, and a zest for life. With her art, Natalina Marcantoni knows how to touch the depths of everyone who encounters them with a reformed and tolerant spirit.

The Race by Silvo Mehle

Artist: Silvo Mehle
Title: The Race
Medium: Giclee Print on Canvas
Size: 100cm x 100cm

About the Artist

Born: 1971
Subjects: Still lifes, landscapes
Style: Mouth Artist
Nationality: Slovenian

Silvo Mehle was born on 17 May 1971 in Ljubljana, but unfortunately his most settling path on 16 January 2017 ended much, far too soon. After a car accident in 1993, he became extremely severely injured in a wheelchair- With a paint brush in his mouth, he created a rather large bero painting, but gradually he is increasingly consolidating his place in the company of painters. The first steps were a force of self-confidence, but with the additional encouragement of our most creative painter, tetraplegic Vojk Gašperut - Gašperja, the painting moves were getting better.

In 2002 he attended the first art workshop in Semič, which gave him a new elana for further creation. Along the way, he was helped with his knowledge: academic painters Prof. Milan Erič and Mladen Stropnik, as well as current mentors Rasso Causevig and Jože Potočnik - Cvrčo. They are grateful that he has deepened his painting even further and that it has become an important part of his life.

From 2003, he became a Scholarship Holder of the association and in 2011 became an Associate Member. Preferring the technique of oil painting, his themes include still lifes and the landscapes of his homeland.