Online Auction - Atmosphere Limited (In Liquidation) & Others

A 2003 Biesse Rover 24 FI42447 CNC machining centre no. 143-07

Working range 1300mm x 4500mm

10 tool carousel

8 sliding suction rails

Two routing spindles (with C-axis)

29 vertical and 14 horizontal drills

Circular saw tool (with C-axis)

Guard fencing, contact mats and two foot pedals

Remote CNC control console

Tooling/Spares cabinet

Please note: The purchaser must provide a risk assessment and removal method statement (RAMS) detailing how they will safely remove the lot from the premises

A 2000 Biesse Rover 30 L3 CNC machining centre no. 05712

Working range 1250mm x 4432mm

12 tool carousel

8 sliding suction rails

Two routing spindles (with C-axis)

20 vertical and 8 horizontal drills

Circular saw tool (with C-axis)

Guard fencing, contact mats and four foot pedals

Remote CNC control console

Tooling/Spares cabinet and fabricated console desk

Please note: The purchaser must provide a risk assessment and removal method statement (RAMS) detailing how they will safely remove the lot from the premises

A 2006 Biesse Artech Akron 246 CNC edge banding machine no. 65417 with dust extraction points, 18kw three-phase electrics, 8 bar pneumatics, 2.1-tonne machine weight and 30m/s suction flow

Please note: The purchaser must provide a risk assessment and removal method statement (RAMS) detailing how they will safely remove the lot from the premises

A 1998 SandingMaster 3000 1,350mm wide belt sanding machine, type SA-3202-1350 no. TK-2077-03 with three-phase electrics and dust extraction point together with a small stock of sanding belts and wall-mounted steel 6 rail horizontal sanding belt rack

Please note: The purchaser must provide a risk assessment and removal method statement (RAMS) detailing how they will safely remove the lot from the premises

A Robland SD-B510 planer thicknesser no. 0114062005 with morticer attachment, 1,300kg machine weight, 6,000rpm speed and dust extraction point

Please note: The purchaser must provide a risk assessment and removal method statement (RAMS) detailing how they will safely remove the lot from the premises

A 1999 Biesse Polymac Single 89-n contour edge banding machine no. 80715 with 250kg machine weight, 2.97kw three-phase electrics, 8 bar pneumatics, foot pedal and dust extraction point

Please note: The purchaser must provide a risk assessment and removal method statement (RAMS) detailing how they will safely remove the lot from the premises

A 1997 SCM SI320 sliding table panel saw no. AB/113456, ref. 121305 with dust extraction point and 715kg machine weight

Please note: The purchaser must provide a risk assessment and removal method statement (RAMS) detailing how they will safely remove the lot from the premises

A 1997 SCM T130 NLL spindle moulder no. AB/106092, ref. 011321 (not in use) together with circa 6 spindles and a fabricated low cabinet

Please note: The purchaser must provide a risk assessment and removal method statement (RAMS) detailing how they will safely remove the lot from the premises

A Brookman 7-25 APM 25 pin dovetailing machine no. 5691A with three-phase electrics and dust extraction point

Please note: The purchaser must provide a risk assessment and removal method statement (RAMS) detailing how they will safely remove the lot from the premises

A Detel Mono 21 dowel hole boring machine, type M-21 no. 03-1412-01 with three-phase electrics, 315kg machine weight and pedal

Please note: The purchaser must provide a risk assessment and removal method statement (RAMS) detailing how they will safely remove the lot from the premises

A Wadkin Bursgreen BGA 150 No. 1 size under and over belt sander no. 62316 with 2.5m x 0.15m belt sander, 35cm diameter disc sander with canting table, bobbin attachment, sliding under-table, three-phase electric motor, DC brake and two dust extraction points

Please note: The purchaser must provide a risk assessment and removal method statement (RAMS) detailing how they will safely remove the lot from the premises

A DCE Unimaster UMA/152/G5 three-phase electric vertical dust extraction unit no. 206974 (not in use)

Please note: The purchaser must provide a risk assessment and removal method statement (RAMS) detailing how they will safely remove the lot from the premises

A 2000 P&J PJ825 dust extraction unit no. ST7220 with fitted rigid metal ducting to three machines

Please note: The purchaser must provide a risk assessment and removal method statement (RAMS) detailing how they will safely remove the lot from the premises

A 1997 P&J PJB825 dust extraction unit no. ST389635498 with fitted rigid metal ducting to six machines

Please note: The purchaser must provide a risk assessment and removal method statement (RAMS) detailing how they will safely remove the lot from the premises

An Adcock-Shipley Bridgeport knee-type turret mill no. 236910776S with T-slot bed, machine vice and sundries (all faults)

Please note: The purchaser must provide a risk assessment and removal method statement (RAMS) detailing how they will safely remove the lot from the premises

Spare Lot

Spare Lot

Spare Lot

Spare Lot

A 2001 Italpresse SCF/8S hydraulic four daylight veneer press no. 121940301 with 8’ x 4’ bed, three-phase electrics and eight hydraulic cylinders (not in use)

Please note: The purchaser must provide a risk assessment and removal method statement (RAMS) detailing how they will safely remove the lot from the premises

A Gibbs Construction 2.5m width two-tray RF lipping press no. 865 with Pye R.F. 12/13 radio frequency generator no. 14016 (not in use)

Please note: The purchaser must provide a risk assessment and removal method statement (RAMS) detailing how they will safely remove the lot from the premises

A Schubert UNOH/3 hydraulic veneer press no. 91222 with 8’ x 4’ table in three sections (each section circa 32"), low voltage heating unit and Brook hydraulic pump

Please note: The purchaser must provide a risk assessment and removal method statement (RAMS) detailing how they will safely remove the lot from the premises

A 1998 Osama S2R-1300 1.3m width roller glue spreader no. 2439 with three-phase electrics and outfeed table (not in use)

Please note: The purchaser must provide a risk assessment and removal method statement (RAMS) detailing how they will safely remove the lot from the premises

A Kuper / Schubert FW1150 zig-zag veneer splicing machine no. 91296 with 1.15m throat (not in use)

Please note: The purchaser must provide a risk assessment and removal method statement (RAMS) detailing how they will safely remove the lot from the premises

A Kuper FZK/D tape veneer stitching machine no. 2912 5732 with circa 80cm throat (not in use)

Please note: The purchaser must provide a risk assessment and removal method statement (RAMS) detailing how they will safely remove the lot from the premises

A Bursgreen three-phase electric overhead floor-standing pillar drill no. BLM57137 with 16” throat and T-slot table (all faults)

Please note: The purchaser must provide a risk assessment and removal method statement (RAMS) detailing how they will safely remove the lot from the premises

Rye horizontal hydraulic press

Please note: The purchaser must provide a risk assessment and removal method statement (RAMS) detailing how they will safely remove the lot from the premises

A Hydrovane 33PUM screw rotary air compressor no. 2HV328422/2 (not in use)

Please note: The purchaser must provide a risk assessment and removal method statement (RAMS) detailing how they will safely remove the lot from the premises

Spare Lot

P&J 2.5m width x 2.2m high dry back paint spray booth with extraction fan, ducting through ceiling to atmosphere, two pressure pots on stand with spray guns and Kremlin Rexson 30:1 spray pump together with a Mirka 915 mobile dust extractor fitted with a Mirka handheld orbital sander and the spray room works furniture (including two metal cabinets with contents and three mobile double-sided multi-tier paint drying racks)

Please note: The purchaser must provide a risk assessment and removal method statement (RAMS) detailing how they will safely remove the lot from the premises

A KED oscillating drawer side edge sanding machine with two 10” belt sanders, dust extraction point and three-phase electrics

Please note: The purchaser must provide a risk assessment and removal method statement (RAMS) detailing how they will safely remove the lot from the premises

A SN10 9” belt edge sanding machine with three-phase electrics and dust extraction point

Please note: The purchaser must provide a risk assessment and removal method statement (RAMS) detailing how they will safely remove the lot from the premises

A Hymmenia / Schubert AS230 2.3m width three-phase electric veneer guillotine no. 24519 with a fabricated infeed table (circa 295cm x 96cm), a fabricated outfeed table (circa 107cm x 218cm) and a fabricated four-tier rack (circa 48cm x 265cm)

Please note: The purchaser must provide a risk assessment and removal method statement (RAMS) detailing how they will safely remove the lot from the premises

A Wadkin Bursgreen 10AGS 10" tilting arbour saw bench three-phase electric table saw, no. 59461

Please note: The purchaser must provide a risk assessment and removal method statement (RAMS) detailing how they will safely remove the lot from the premises

A bench fitted leather skiving machine with pedal control

Please note: The purchaser must provide a risk assessment and removal method statement (RAMS) detailing how they will safely remove the lot from the premises

A 2003 Gerber DCS 2500 single-ply static fabric cutting machine no. 2012on a 12ft suction cutting table (suction table dimension 188cm x 366cm) with steel mobile twin fabric roll dispenser (roll width circa 175cm)

Please note: The computer monitor is missing from the control unit

Please note: The purchaser must provide a risk assessment and removal method statement (RAMS) detailing how they will safely remove the lot from the premises

A HP DesignJet 500PS plotter no. SG1AP3108Q on mobile stand

A Pegasus M52-13 overlock sewing machine with table, three thread holders and twin pedal control

A Protex Wimsew W-B872-5 sewing machine no. 111100822, with table, three thread holders and pedal control

Spare Lot

Sundry hand power tools, as lotted and including:
A 1999 Makita 3901 biscuit jointer no. 34659E in a rigid plastic case
An unbranded (assumed to be Makita) laminate trimmer
A Wurth Master BS 14-A Solid 14.4V cordless drill driver no. 062006 with a Wurth Master AL 30-SD battery charger
A 2008 Hitachi DS 14DVF3 14.4V cordless drill driver no J4082119
Two Hitachi UC18YG 18V battery chargers
A Hitachi EB1214S 12V battery

A redundant electric forklift vertical stacker (advised inbuilt battery charger not functioning)

Please note: The purchaser must provide a risk assessment and removal method statement (RAMS) detailing how they will safely remove the lot from the premises

Various sash clamps and g-clamps as lotted

The works furniture as lotted and including (furniture only, contents not included):
A fabricated down-draft sanding table (built on a P&J dust extraction hood) circa 210cm x 100cm
Sundry fabricated dollies, trolleys, and box trolleys
A fabricated workbench with a Record 53 vice, backboard with two shelves and padded corner circa 165cm x 90cm
A fabricated workbench circa 135cm x 74cm
A fabricated workbench with a Record 53E vice, circa 190cm x 95cm

Please note: The purchaser must provide a risk assessment and removal method statement (RAMS) detailing how they will safely remove the lot from the premises

The works racking as lotted and including (racking only, contents not included):
Two bays/three tiers fabricated and welded racking circa 300cm high,130cm deep, bay widths 280cm and 230cm
Two bays/three tiers Blue and Orange boltless heavy-duty racking
One bay/two tiers Grey and Orange boltless heavy-duty racking
Three bays of lightweight racking and a steel cupboard
Three wall mounted lumber storage racks, seven tiers, circa 270cm high

Please note: The purchaser must provide a risk assessment and removal method statement (RAMS) detailing how they will safely remove the lot from the premises

The sheet stock of MDF, MCF, plywood, veneered boards and bamboo, sheet stock off cuts as lotted

Please note: The factory is still operational and using the remaining stock as such the quantity of stock available may be less than photographed. Viewing is strongly recommended

Please note: The purchaser must provide a risk assessment and removal method statement (RAMS) detailing how they will safely remove the lot from the premises

The Fenix NTM sheet stock as lotted and including:
1 x 420cm x 160cm
1 x 250cm x 130cm
1 x 150cm x 160cm
1 x 160cm x 55cm
1 x 110cm x 170cm
1 x 110cm x 85cm

Please note: The factory is still operational and using the remaining stock as such the quantity of stock available may be less than photographed. Viewing is strongly recommended

Please note: The purchaser must provide a risk assessment and removal method statement (RAMS) detailing how they will safely remove the lot from the premises

Spare Lot

Spare Lot

A Clarke Woodworker 12” benchtop woodcutting bandsaw

A Guild PGB150G 150W 150mm double ended bench grinder no. 201627 on a fabricated wooden stand

A Numatic NTD 2003-2 mobile industrial vacuum cleaner no. 061612889

Various pneumatic air tools as lotted and including:
Two BeA S717-410 23-gauge headless pinners
A BeA SR451-717 16 gauge bradder
A BeA S451 Type 142 upholstery stapler
A BeA SK438-617 tacker
Three unbranded drills
A Chicago Pneumatic CP817 angle drill no. 97045A
A Desoutter DB12-P drill no. 768

A 2006 Hitachi M6SB laminate trimmer no. 860059 and a 2007 Makita 3707FC laminate trimmer no. 15090

A Makita 2612BR router no. 22014SE

A Bosch PSS 250 AE orbital sander no. 3603 C40 270 and an Xtreme M1Y-DU26-185J-43-1300 circular saw no. 201442

DeWalt power tools as lotted and including:
A DeWalt DW433 75mm/800W belt sander
A DeWalt DC330 18V cordless jigsaw (no battery)
A DeWalt DW919 18V cordless flexible floodlight (no battery)
A DeWalt DC385 Type 2 cordless reciprocating saw no. 940484 (no battery) in a rigid plastic case

The works furniture as lotted and including (furniture only, contents not included):
A fabricated work bench with backboard and shelf and a Record 52½ E vice, circa 240cm x 85cm)
A fabricated low workbench circa 120cm x 70cm (bandsaw not included)
A fabricated workbench with backboard and shelf and a Record 53 vice, circa 172 x 83cm
Three metal cabinets
Three fabricated worktables circa 200cm x 100cm

Please note: The purchaser must provide a risk assessment and removal method statement (RAMS) detailing how they will safely remove the lot from the premises

The works racking as lotted and including (racking only, contents not included):
One bay/two tiers and one/two tiers Blue and Orange boltless heavy-duty racking
One bay/two tiers and one bay/three tiers Grey and Orange boltless heavy duty racking

Please note: The purchaser must provide a risk assessment and removal method statement (RAMS) detailing how they will safely remove the lot from the premises

An Eight tread industrial mobile warehouse ladder with a Powerfix KH3267 stair climbing truck

An unbranded hand hydraulic pallet truck

The fabric stock as lotted together with the boltless racking

Nine bays of sundry furniture fixtures and fittings

A lightwood-veneered ten-person meeting table in two sections (each section 180cm x 90cm) with six lightwood-veneered chairs and a Samsung Cool n Cool upright refrigerator/freezer with water dispenser

A glass topped and metal based meeting table circa 240cm x 110cm

Thirteen beech wood Elysee style occasional chair frames and a beech wood Elysee style stool frame

Two mahogany wood Elysee style occasional chair frames

Six beech wood Empire style occasional chair frames and a beech wood Empire style stool

Eleven beech wood dressing stool frames

Ten beech wood Victorian Gentleman’s style chair frames

Five beech wood Louisa style ladies chair frames

Six beech wood Mayfair style chair frames and three beech wood Mayfair style carver chair frames

Seventeen beech wood Sandhurst style transitional chair frames

Seven beech wood Prince of Wales style shield back chairs

Fifteen beech wood Prince of Wales style shield back carver chair frames

Fifteen beech wood Prince of Wales style shield back carver chair frames

Ten beech wood Prince of Wales style shield back carver chairs frames

One beech wood Wheatear style shield back chair frame and two beech wood Wheatear style shield back carver chair frames

Twenty beech wood Sheraton style interlace chair frames

Eleven beech wood Sheraton style interlace carver chair frames

Three beech wood Regency style interlace chair frames and three beech wood Regency style interlace carver chair frames

Five mahogany wood Regency style interlace carver chair frames

Nine beech wood Regency style cross back chair frames and one Regency style cross back carver chair frame

Five mahogany Regency style cross back chair frames

Six beech wood Camberley style carver chair frames

Seven beech wood Viceroy style oval back chair frames (three with rattan backs) and four beech wood Viceroy style oval back carver chair frames (one with rattan back)

Three beech wood Chantilly style chair frames (two with rattan backs)

Two beech wood Penrose style chair frames and one beech wood Penrose style carver chair frame

Thirteen beech wood Hepplewhite Wheatear style chair frames and nineteen beech wood Hepplewhite Wheatear style carver chair frames

Eighteen mahogany wood small Chippendale style bamboo back (with ball & claw feet) chair frames and one mahogany wood small Chippendale style bamboo back (with ball & claw feet) carver chair frame

Three mahogany wood large Chippendale style (with ball & claw feet) chair frames

Twenty mahogany wood Chippendale style (with ball & claw feet) chair frames and fifteen mahogany wood Chippendale style (with ball & claw feet) carver chair frames

Fifteen mahogany wood Chinese Chippendale style chair frames

Twenty-five mahogany wood Country Chippendale style chair frames

Twenty-five mahogany wood Country Chippendale style chair frames

Twenty-four mahogany wood Country Chippendale style carver chair frames

Twenty-eight mahogany wood Chippendale style straight leg chair frames

Fourteen mahogany wood Hepplewhite style balloon back chair frames

Twenty-four mahogany wood Hepplewhite style barley motif stick back chair frames

Twenty-four mahogany wood Hepplewhite style barley motif stick back carver chair frames